NYLON / CAST NYLON (PA6/ PA6G)

Nylon/ Cast Nylon (PA6/PA6G) is highly resistant to shock and abrasion. It has excellent sliding and wear properties, has high chemical resistance to many solvents such as oils, fuels and weak alkaline solutions.

Applications: Cast Nylon is used in mechanical, chemical and electrical sectors in the manufacturing of articles such as bearings, cogwheels, rollers, screws, gears, pulleys, gas rigs, connections, pump components, coil cores, fans and gaskets.

Form: Sheet, Rod

Thickness: 10mm to 100mm

Diameter: 50mm to 300mm

Colour – Natural, Black

Standard Size: Sheet – 1000mm X 2000mm, Rod – 1000mm

 

ADDITIONAL INFORMATION

 

Properties Units Value
PHYSICAL
Density g/cm³ 1.15
Water Absorption, 24 hrs % 0.3
Water Saturation % 7
MECHANICAL
Tensile Strength psi 12,000
Tensile Elongation at Break % 20
Flexural Strength psi 16,000
Flexural Modulus psi 500,000
Compressive Strength psi 15,000
Compressive Modulus psi 400,000
Hardness, Rockwell R R115
THERMAL
Melting Temperature °C 215
Max Operating Temp °C 93

NOTE: The information stated in the table above are typical values intended for reference and comparison purposes only. It may NOT be used as a basis for design specifications or quality control. Contact us for complete manufacturers’ specifications.

For further details and quotations, Contact us at sales@allmarketing.com.sg.

ENQUIRE NOW

NOTE: The information stated in the table above are typical values intended for reference and comparison purposes only. It may NOT be used as a basis for design specifications or quality control. Enquire for complete manufacturers’ specifications.