ACRYLIC SHEETS AND RODS

Acrylic – Most commonly use plastic material, Acrylic is a preferred choice for mostly aesthetic purposes due to its attractive finishing. Its properties includes:

– Allowing more than 90% of light transmission
– Light weight
– Easy to work on
– Good thermal insulation
– Low Cost

Common Acrylic applications includes Advertising, Mechandise displays, Shelves Thermoformed Products, Signboards and Glazing material.

Available in Sheet, Rod and Pipe form

Colour: Various Colour for Sheets, Clear Colour for Rods and Tubes
Standard Size: Sheet – 1220mm x 2440mm, Rod – 1000mm, 2000mm
Thickness: 1mm to 80mm
Diameter: 6mm to 150mm

*Image for illustration only, for exact specification, please contact us for more details.

Click to View Product

POM / DELRIN (POLYOXYMETHYLENE)

POM is a general purpose engineering plastics as it is easily machinable, it is also one of the preferred choices when comes to cost sensitive low frictional application. POM properties includes:

– High strength, stiffness, surface hardness
– Good dimension stability and toughness
– Resistance against fatigue, solvent, fuel, abrasion, wear and friction.

Common POM applications includes Gears, Bearing, Conveyors, Window Guides, Speaker Grilles, Medical Devices, Fasteners and Furniture Component.

Available in Sheet and Rod form.

Colour: Black, White
Standard Size: Sheet – 1000mm x 2000mm, Rod – 1000mm
Thickness: 1mm to 100mm
Diameter: 4mm to 250mm

*Image for illustration only, for exact specification, please contact us for more details.

Click to View Product

PA6G/ PA6 (CAST NYLON / NYLON)

Nylon/ Cast Nylon has a higher compression strength and impact resistance as compared to other engineering plastics. Some of Nylon’s properties includes:

-Corrosion and wear resistance
-Improved component working life and reducing maintenance
-High toughness
-High mechanical strength
-High fatigue resistance
-Shock absorbant and resistance
-Self lubrication and good noise dampening

Common Nylon applications includes Gear, Pulley, Bushes, Sprockets, Pads, Blades, Fan Blade, Sheaves, Rubber bearings, Valve Seats and Rollers.

Available in Sheet and Rod form.

Colour: Black, Natural, Blue
Standard Size: Sheet – 1000mm x 2000mm, Rod – 1000mm
Thickness: 10mm to 100mm
Diameter: 50mm to 300mm

*Image for illustration only, for exact specification, please contact us for more details.

Click to View Product

PVC (POLYVINYL CHLORIDE)

PVC is one of the most used general plastic, it has one of the best ratio of economic cost to performance. Application for PVC ranges from applications in daily life all the way to specialised industrial applications. Some of PVC properties includes:

– Good dimension stability
– Self-extinguishing
– Electrical insulation
– Corrosion resistance
– Light Weight
– Low Moisture Absorption

Common PVC applications includes Thermoforming, Advertising, Corrosive envrironment, Seals, Bearing, Tanks for chemicals and water, Ventilation and Water piping.

Available in Sheet and Rod form.

Colour: Grey, Clear
Standard Size: Sheet – 1220mm x 2440mm, Rod – 1000mm, 2000mm
Thickness: 1mm to 50mm
Diameter: 10mm to 80mm comes in various dimension

*Image for illustration only, for exact specification, please contact us for more details.

Click to View Product

PP (POLYPROPYLENE)

shutterstock_305596850

PP (Polypropylene) – Polypropylene is a plastic that is used in many different industries. One of the common usage for polypropylene is to make laboratory equipment that require frequent sterilisation by heat. Its high resistance against temperature makes it an ideal material for this kind of application. Other properties includes:

– Good mechanical strength
– Good corrosion resistance
– Heat resistance
– Good resistance to fatigue

Common PP applications includes Trays, Automotive Components, Laboratory Equipment, Chemical Tanks.

Available in Sheet form.

Colour: Natural, White, Grey
Standard Size: Sheet – 1220mm x 2440mm
Thickness: 3mm to 25mm

*Image for illustration only, for exact specification, please contact us for more details.

Click to View Product

PE/HDPE/UHMWPE (POLYETHYLENE)

PE (Polyethylene) – Polyethylene is a general thermoplastic with good chemical resistance and elongation properties. PE also have good insulation properties and is one of the material choice for plastic welding application. HDPE and UHMWPE are available for applications with more demanding material properties in terms of mechanical strength.  Some of its properties includes:

– Good chemical resistance
– Easy to work on
– Low frictional coefficient
– Good electrical insulation
– High toughness and Stiffness (HDPE/UHMWPE)
– Low moisture absorption (UHMWPE)
– High impact strength (UHMWPE)

Common PE applications includes Gears, Housing, Gaskets, Cutting Board, Wear Plate, Guide Rail, Bumper Rail, Household Items.

Available in Sheet and Rod form.

Colour: Natural, Black
Standard Size: Sheet –  1220mm x 2440mm, Rod – 1000mm, 2000mm
Thickness: 1mm to 80mm
Diameter: 10mm to 100mm

*Image for illustration only, for exact specification, please contact us for more details.

Click to View Product

PC (POLYCARBONATE)

PC (PolyCarbonate) – PolyCarbonate can be easily process, machined and thermoformed. Due to these properties, PC is extensively used in many different industries and application. Some of its properties includes:

– Excellent impact resistance
– Excellent Strength and toughness
– Good dimensional stability
– High transparency
– Good electrical insulation
– Good heat resistance

Common PC applications includes housing equipments, automotive exterior parts, lighting fixtures, signboards, windows, medical supply components, plastic lenses for glasses.

Available in Sheet and Rod Form.

Colour: Clear
Standard Size: Sheet – 1000mm x 2000mm, Rod – 1000mm
Thickness: up to 50mm
Rod: up to 150mm

*Image for illustration only, for exact specification, please contact us for more details.

Click to View Product

PTFE/TEFLON (POLYTETRAFLUOROETHYLENE)

PTFE/Teflon (Polytetrafluoroethylene) – Teflon is a synthetic fluoropolymer that has numerous applications. It can take temperature of +/-200 degrees celsius and has good resistance against chemical and corrosion, PTFE also have exceptional low frictional coefficient, making it one of the prime choice for sliding plate applications. Some of its properties includes:

– High chemical resistance
– Huge temperature range (+/- 200 deg celcius)
– Low frictional coefficient
– Good electrical insulation
– Low mechanical strength
– Fire resistance

Common PTFE applications includes Bush, Roller Washer, Spacer, Gears, Seals, Gasket, Guide, Electrical insulation parts, bearing pads.

Available in Sheet, Rod and Pipe form.

Colour: White
Standard Size: Sheet – 1000mm x 2000mm, 1200mm x 1200mm, Rod – 1000mm, 300mm (For above dia. 80mm)
Thickness: Up to 50mm
Diameter: Up to 200mm

*Image for illustration only, for exact specification, please contact us for more details.

Click to View Product

PU (POLYURETHANE)

pu-3

 Polyurethane(PU) is a material that encompass both the properties of rubber and plastic. PU is highly resistance to abrasion and impact, it also offers a certain degree of elasticity similar to rubber It is also resistant to flex fatigue and have the ability of bear heavy load.

-High Elasticity, Tear Resistance
-Good Load Bearing Capability
-Excellent Abrasion Resistance
-Good Impact Resistance
-Weather Resistance
-Does not react well with Oil and Solvent

Common PU applications includes Roller, Structure Support, Mechanical Equipment

Available in Sheet and Rod form

Colour: Natural and Black
Standard Size: Sheet – 300mm x 300mm, 600mm x 600mm, Rod – 300mm, 500mm
Thickness: Up to 40mm
Diameter: Up to 100mm

Click to View Product